UL 325 7th Edition Compliance in 2026: What Facility Managers Still Get Wrong
UL 325 7th Edition governs your parking gate operators. Facility managers still misclassify gates, skip monitored sensors, and bypass alarms. Fix these gaps.
Read more →Installation
Planning, setup, maintenance, and compliance guides for barrier gate installations.
Barrier Gate Site Assessment: What to Check Before Summer Installation
Before scheduling summer barrier gate installation, facility managers must complete a structured site assessment. Here's what to evaluate before crews arrive.
Read more →
Barrier Gate Site Assessment: What to Check Before Spring/Summer Installation
A pre-contractor site assessment guide for barrier gate installations timed to the spring/summer window. Covers post-winter site conditions, concrete timing, …
Read more →
UL 325 Compliance for Parking Barrier Gates: A Complete Walkthrough
A complete walkthrough of UL 325 compliance for parking barrier gates—covering classes, entrapment protection, documentation, and liability exposure.
Read more →
Barrier Gate Maintenance: Preventive Schedules and Common Repairs
Complete preventive maintenance schedule for barrier gates. Weekly, monthly, quarterly, and annual tasks plus common repair procedures.
Read more →
Barrier Gate Safety Standards and Compliance Requirements
Essential safety standards for barrier gates: UL 325, ASTM F2200, ADA, and OSHA requirements. Compliance checklist for operators and installers.
Read more →
Planning a Barrier Gate Installation: Site Assessment Checklist
Complete site assessment checklist for barrier gate installation. Covers traffic flow, utilities, ADA compliance, and infrastructure requirements.
Read more →
ASTM F2200 Compliance for Vehicular Barrier Gates: What It Covers and Doesn't
ASTM F2200 is widely cited but frequently misunderstood. The standard governs gate construction, not installation or operation. Knowing the difference matters …
Read more →
Fail-Safe vs Fail-Secure Barrier Gates: Code Requirements by Facility Type
Power-loss behavior is one of the most misunderstood gate specifications. Fire code, security requirements, and insurance underwriters often pull in opposite …
Read more →
Parking Barrier Gate Noise Compliance in Residential Applications
How to meet noise ordinances for parking barrier gate installations in residential and multifamily settings—dBA limits, EPA/HUD frameworks, quiet-mode options.
Read more →
Copper Wire Theft Mitigation in Outdoor Gate Installations
Practical strategies to deter and detect copper wire theft at barrier gate sites, from conduit specification to monitored cable loss alarms.
Read more →
Intercom Integration with Unattended Barrier Gates: SIP, 2-Wire, and Video Intercoms
Unattended gates need a way for drivers to reach a human when credentials fail. The integration choices — analog, IP, or cellular — each have quirks installers …
Read more →
ADA-Accessible Parking Gate Considerations: Reach Envelopes and Operable Parts
ADA compliance considerations for barrier gate installations — operable parts height, reach ranges, keypad placement, and accessible route integration.
Read more →
Emergency Vehicle Preemption (Opticom) Integration With Barrier Gates
How to integrate Opticom and GTT emergency vehicle preemption with barrier gate controllers, and what code and jurisdiction rules apply.
Read more →
Salt Spray Corrosion Protection for Coastal Barrier Gate Installations
Coastal installations destroy gate hardware in a fraction of the design life of inland units. Enclosure ratings, fastener metallurgy, and coating choices …
Read more →
Gate Arm Length Selection and Approach Geometry
Practical guidance on gate arm length, lane width, swing clearance, and vertical clearance for barrier gate installation planning.
Read more →
Cold Climate Ground Heaving on Barrier Gate Bases: Frost Depth and Foundation Design
Frost heave lifts, tilts, and cracks barrier gate foundations in every northern climate. Getting the footing right during installation costs a fraction of …
Read more →
Photo Beam vs Safety Edge: Choosing Redundant Entrapment Protection
How to select and combine photo beams and safety edges to meet UL 325 dual-redundancy requirements for barrier gate entrapment protection.
Read more →
Multi-Lane Coordinated Barrier Gate Installations: Sync, Spacing, and Shared Detection
Installing two or more barrier gates side-by-side introduces detection crosstalk, timing coordination, and spacing constraints that single-gate layouts never …
Read more →